Carbon Monoxide (CO) and Hydrocarbons (HC) are two by-products of any internal combustion engine that can cause nausea, dizziness, headaches, fatigue, unpleasant odors, and even fatal asphyxiation. Determine the performance and efficiency of your internal combustion forklift trucks with a Bridge Gas Analyzer.
The Hard Seal Exhaust Port Kit allows you to install a hard seal exhaust port (threaded nutsert) into the exhaust pipe upstream of the tailpipe in the exhaust system. This method improves the performance of gas analysis for engine tuning and diagnosis, as well as isolating the catalytic converter for enhanced diagnosis - resulting in much more credible and repeatable gas concentrations. The analyzer will provide an accurate determination of gas emissions levels and engine diagnostics, such as Lambda (AFR) and Combustion Efficiency.
Part Number: A000034831
Every Bridge Analyzer has the ability to directly interface with a serial printer. A hardcopy printout of gas readings can be obtained with a single push of a button on the analyzer front panel. The printer is battery powered and connects to a serial port built into the analyzer. Once connected and turned on, the thermal printer will produce a hardcopy record of the gas readings being displayed when the ‘PRINT’ (4-gas, 5-gas) or the ‘CAL’ (2-gas) button is depressed. This function is totally automatic, and allows the user to create hardcopy records of ‘before and after’ test results or any other significant gasreadings.This portable printer is less than 1 lb. and measures 4.5 x 3.5 x 2.0 inches. It will operate for a full 12-hour day from one charge. The hardcopy printout is produced within five seconds on 2.3 inch wide thermal paper. (Paper not included.) The printer comes complete with its charger and interface cable to the analyzer.
2 Gas Analyzer
- Measures - CO, HC
- Power off the vehicle or use battery pack for 6 hours
- Data available in 30 seconds
- Includes hose and exhaust probe
- Inexpensive, operator accessible filters
| Part Number | Description |
|---|---|
| A000019633 | 2-Gas Analyzer w/Battery Pack (CO, HC) |
4 and 5 Gas Analyzers
- Measures - CO, HC, CO2, O2, (NOX on 5 Gas Analyzer)
- Self-powered with internal battery pack - 2 hour capability
- Real time Lambda air/fuel ratio calculated
- Instant on - data in 30 seconds
- Inexpensive, operator accessible filters
| Part Number | Description |
|---|---|
| A000019632 | 4-Gas Analyzer (CO, HC, CO2, O2) |
| A000019630 | 5-Gas Analyzer (CO, HC, CO2, O2, NOX) |
Hard Seal Exhaust Port Kit
| Part Number | Description |
|---|---|
| A000020996 | Hard Seal Exhaust Port Kit with Water Trap (25 Inserts) |
| A000020995 | Hard Seal Exhaust Port Kit - Basic (25 Inserts) |
| A000020997 | Hard Seal Port Replacements (25 Inserts) |
Serial Printer
Every Bridge Analyzer has the ability to directly interface with a serial printer. A hardcopy printout of gas readings can be obtained with a single push of a button on the analyzer front panel. The printer is battery powered and connects to a serial port built into the analyzer. Once connected and turned on, the thermal printer will produce a hardcopy record of the gas readings being displayed when the ‘PRINT’ (4-gas, 5-gas) or the ‘CAL’ (2-gas) button is depressed. This function is totally automatic, and allows the user to create hardcopy records of ‘before and after’ test results or any other significant gasreadings.This portable printer is less than 1 lb. and measures 4.5 x 3.5 x 2.0 inches. It will operate for a full 12-hour day from one charge. The hardcopy printout is produced within five seconds on 2.3 inch wide thermal paper. (Paper not included.) The printer comes complete with its charger and interface cable to the analyzer.
Accessories
| Part Number | Description |
|---|---|
| A000019993 | Compact EGA Probe |
| A000019634 | Battery Pack for 2-Gas Analyzer |
| A000011706 | PC display/data capture/report printing software for 4 and 5 gas analyzers |
| A000034831 | Printer |
| A000011712 | Needle Probe - 12" x 1/8" diameter cross drilled quick release |
| A000011713 | Needle Probe - 24" x 1/8" diameter cross drilled quick release |
| A000011709 | Regulator/Valve Assembly for Calibration Gas Cylinders |
| A000011707 | Filter Pack - 12 month usage |
| A000011716 | 50mm Primary Particle Filter (6 pieces) |
| A000011717 | Water Trap Filter (6 pieces) |
| A000011718 | 25mm Analyzer Filter |
| A000011719 | O2 Sensor |
| A000011720 | NO Sensor |
| A000036009 | Sample Line Assembly, 20 feet long |
| A000011715 | Water Bowl/Check Valve Assembly |
| A000025166 | Adapter, AC for 4 and 5 gas analyzers |