Blue Guardian Pallet Protector
Part Number: A000056098
The Blue Guardian Pallet Protector enhances product and pallet protection. By redistributing the impact of a forklift to the sturdy center block of a pallet, the Blue Guardian reduces product damage often related to standard forklift impact. Its low-profile polyurethane bumper avoids direct contact with the load to reduce damage to the primary and secondary packaging of palletized products. Using this pallet protector results in fewer wood splinters from pallets, minimizing debris and forklift tire damage. Bumper kit included.
- Quick and easy to install
- Compatible with all ITA Class II forklift carriages
- No permanent modification to the forklift needed
- Length - 8.75 in / 476.3 mm
- Width - 7.00 in / 117.8 mm
- Height - 0.40 in / 10.2 mm
- Weight - 17.5 lb / 7.9 kg
| Part Number | Description |
|---|---|
| A000049005 | Replacement Bumper Kit |
Pallet Dawg
Part Number: A000036189
Pallet Dawg offers enhanced protection of transported products and pallets, reducing costs related to damage. The low-profile bumper mounts easily to ITA Class II fork carriages, regardless of lift truck make and model. Made of a high density polyethylene co-polymer, the Pallet Dawg can be easily attached between the forks on your forklift.The Pallet Dawg reduces damage to palletized products and their packaging by preventing contact with the load. The attachment redirects the impact force from the lift truck to the center block of the pallet, instead of the top boards, where products are located. Housekeeping is also improved due to less debris from splintered pallets, which can damage lift truck tires.
- Installs in minutes with a 9/16 inch socket wrench
- Compatible with all ITA Class II forklift carriages
- Includes spacer plate to ensure a tight fit to forklift carriage
Bull Dawg
Part Number: A000062401
All the features of the Pallet Dawg, plus:
- Two galvanized steel reinforcement beams
- Engineered to endure extreme conditions
- Super-tough in severe cold environments
- Stands up to those extra hard hits
Pallet Saver (Class III)
Part Number: A000044882
The Pallet Saver can help reduce pallet and product damage by padding accidental impacts with a rubber pad. The Pallet Saver attaches to the carriage of the lift truck and protrudes beyond the face of the forks, so that it will impact the pallet before the forks.
- Compatible with all ITA Class III forklift carriages
- Easy installation and removal
- Heavy duty construction
Safe-Bump Forklift Protectors
Part Number: A000036175
Add to some padding to your forklift with Safe-Bump Forklift Protectors. Designed to reduce product and forklift damage, Safe-Bump is constructed of a soft PVC plastic that will absorb energy upon impact. The soft bumpers attach anywhere on the forklift, including the forks, with magnets and two-way tape to absorb impacts. The bumpers can easily bend 90 degrees to fit around corners. Each bumper includes 2 magnets, 3M VHB two-way tape and fork brackets.
Fork Kushions®
Fork Kushions offer a resilient, yet durable solution by equipping a forklift with specially engineered polyurethane bumpers that are mounted to the upright of the fork. These highly engineered bumpers provide cushioning protection from marring, denting, and other forms of damage. The unique structure offers excellent wear properties and vibration deadening without compromising the load capacity. Fork Kushions are mounted directly to the face of the fork utilizing a permanent mounting bracket. The bracket is equipped with a high performance quick adhesion system, providing easy installation and maximum bond strength. By eliminating the need to weld or rivet the brackets, there is no compromise to the OSHA regulated safety ratings of the forks. The brackets will not move or shift and will withstand constant use and force. All Kushions are sold in sets of 2 and are made to a standard length of 24 inches. Custom sizes and lengths are available as special orders.
| Part Number | Description |
|---|---|
| A000025814 | Max Impact 5" x 24" |
FlatFork Digital Level Indicator
Product damage is often due to the tilt of the forks when entering and exiting pallets. The risk of pallets mistakenly being pushed or pulled off of a rack is significant.
FlatFork, now available through the Promatch parts program, is a digital fork level indicator that notifies operators when forks are level by displaying a blinking red, yellow or green light. FlatFork works on virtually any lift truck—counterbalanced and reach trucks. The reach truck model uses paired units and RFID technology. One box attaches to fork carriage to measure the tilt of the forks, and it sends a signal to a second display box in front of the operator.
Installation is less than a minute. FlatFork uses a powerful magnet, making it transferable between forklifts. Two standard D alkaline batteries are required.
Features:
- Takes less than one minute to setup and install
- Accurate within 0.25 of a degree
- IP67 Rating, CE Mark approved
- Uses standard D batteries
- Rugged ABS box is tightly sealed and protected against dust and water
- Works with a variety of forklift attachments
- Attaches with a magnet, making the indicator portable and transferable
- Contains LED light display
| Description | Part No. |
|---|---|
| FlatFork - Counterbalanced | A000061175 |
Digital Tilt Indicator
Part Number: A000046361
Cascade’s Digital Tilt Indicator works on virtually any lift truck. This visual aid lets you know when your mast is tilted forward, backward or true vertical. The sensitivity of the Digital Tilt Indicator is precise to within one degree. It clearly displays the angle of the mast at all times which eliminates guesswork and ultimately reduces damage and increases speed and efficiency.
Features:
- Compatible with 12V systems
- Accurate within one degree
- Vibrant LED display
- Hardened steel protective mounting bracket
- Can be mounted on the left-hand or right-hand side of the mast
Accu-Tilt Fork Tip Level Indicator
Part Number: A000031466
Incorrect fork tip angle is the leading cause of both racking and product damage. Even the most experienced operator has difficulty judging the tilt of the forks when entering pallets located high on the rack. The Accu-Tilt shows the level of the forks at all times, eliminating the guess work and reducing potential damage. The Accu-Tilt will also indicate the correct angle to travel with a load, as well as parking the lift truck.
Battery Hook
Part Number: A000025832
Heavy duty fork attachment slides easily and securely onto lift truck forks. The industrial-strength accessory gives lift trucks the ability to handle heavy loads with overhead, single-point lift designs. Ideal for maintenance tasks on vertical-extraction forklift battery fleets. Crafted from heavy-duty steel, the fork attachment can lift loads up to 6,000 pounds. Finished with an acid- and impact-resistant powder coating, integrated securing chains lock to the fork carriage to provide another layer of stability to the entire lifting apparatus. Fork attachments come standard with a powerful spring-latch hook, ensuring a dependable seal.
- Slides easily onto the fork(s) of a lift truck for vertical material handling
- Designed for maintenance applications
- Equipped with a 48” (1219 mm) securing chain to attach around fork carriage
- Includes powerful spring-latch hook
- 6,000 lb (2722 kg) capacity
Fork Stryper Stencil
Part Number: A000032079
The Fork Stryper Stencil is designed to increase fork visibility, reducing the chance of tripping over lowered forks and head bumping on raised forks. The stencil acts a guide for painting well defined safety lines on the side of forks.