Orlaco Cameras

There is one factor that limits how quickly and effectively the driver can work: the view. The operator’s view of the fork position, view of the load, and view of the immediate surroundings can be supplemented with an Orlaco camera system. Separate camera systems are available to accommodate counterbalance and reach truck applications. Contact dealer support with any questions concerning an application or mounting the system to a truck. Click here to see a demonstration.

FAMOS Camera Systems for Counterbalance Trucks

The FAMOS Camera is an extremely sturdy, compact industrial camera. The advanced CMOS sensor camera is shock and vibration-proof, 100% waterproof, has heated lens glass and provides a quality image in all weather conditions. In addition, the integrated 'safety ticker' detects frozen images, to notify operators that the camera is active. The FAMOS camera has been redesigned, reducing the number of parts and allowing the camera to achieve the highest EMC standards. With its advanced CMOS sensor, the camera has a light sensitivity of 0.05 lux. With a special hard coating to help prevent scratches, the heated lens glass is standard.

FAMOS Fork View Camera Kit (Carriage Mount)

Part Number: A000053757

An Orlaco camera allows the operator to see where the forks are entering a pallet for accurate fork placement. It is ideal for storage spaces where visibility is extremely limited due to height, shelving depth or low light conditions.

Kit includes:

A mounting bracket for installation will need to be added locally.

FAMOS Rear View Camera

Operators should always look in the direction of travel. Orlaco's FAMOS Rear View Camera can help provide some environmental awareness of the area immediately behind the machine before the operator travels in reverse. With a rear view system, the camera is mounted on the back of the truck. The RLED monitor comes with a fully adjustable clamp bracket that is mounted in the truck's cabin.

AMOS Camera Systems for Reach Trucks

Fork View Camera (Mid-Mast Mount)

Picking or placing a load at extreme heights can sometimes be challenging. However, when a camera monitor system is used to see the placement of the forks and load it allows for more efficient operation of the forklift. The AMOS camera system is suitable for both single- and double-reach trucks.

A mounting bracket is required for mid-mast mounting installation and will need to be manufactured locally.

Mast cable part number A000037841 is required in place of A000036055 for all Jungheinrich ETV Reach Trucks.

Optional Equipment and Accessories

Parts Needed for 2nd Camera Installation

Parts Needed to Install Camera on Carriage of Reach Truck and Counterbalance Truck with 3-Stage Mast